Home › Crawl space › Crawl space insulation: where it goes and where it fails

Crawl space insulation

Insulation only works while it stays dry. Pick the location first, then the material.

Crawl space insulation goes either in the floor above the space or on the foundation walls around it. Which one is right depends on whether the space is vented or sealed.

This page prints no prices and does not recommend a brand or a company. It explains the choice so you can read a quote.

Vented space: insulate the floor

If the vents stay open, the crawl space is outside the thermal envelope. Insulation belongs between the joists, under the subfloor. Cold floors in winter are the usual reason people look at this. The floor insulation page covers it.

Sealed space: insulate the walls

If the space is closed off and treated as part of the house, the walls get the insulation and the floor above does not. See encapsulated insulation for how that setup works.

Wet insulation does more harm than none

Fiberglass batts that sag, get damp and hold water against the wood are a common failure. Soaked insulation stays wet for months and keeps the joists wet too. Fix the water first. Our crawl space moisture page lists the usual sources.

Do not insulate over bare soil

Bare ground gives off vapor all year. A continuous ground cover with sealed seams comes before any insulation, in either layout.

Pipes and ducts need a plan

In a vented space, water lines sit below the insulation and can freeze. Ask how they will be protected. A good plan names the pipes, not just the floor.

Leave the rim joist in the picture

The band of wood around the top of the wall leaks air in many homes. It is often handled separately. See rim joist insulation.

When to skip it

If the space is damp, leaking or shows signs of pests, do not add insulation yet. Dry it out and fix the cause. Insulation can hide a problem you still need to see.

Local rules vary

Required materials, fire protection and vent rules are set by state and city. Ask your local building department what applies before you start or sign anything.

Frequently asked questions

Where should crawl space insulation go?

In the floor above if the vents are open, or on the foundation walls if the space is sealed.

Should I insulate the floor and the walls?

Usually one or the other. Doing both can trap moisture and defeat the plan.

Does insulation fix a damp crawl space?

No. Insulation controls heat, not water. Stop liquid water and cover the ground first.

What happens if insulation gets wet?

It loses most of its value and can hold moisture against the wood. Wet insulation should be replaced after the source is fixed.

Do I need a permit?

Rules are local. Your building department can tell you.

Sources

What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.

Keep reading