Home › Floor structure › Blocking between joists: what it is for and why it matters

Blocking between joists

Those short pieces of lumber between the joists are not filler. They keep the floor frame stiff and straight.

Blocking between joists is short lumber fitted between neighboring joists to keep them from twisting and to help them share load. You can see it as a row of small pieces across the joists, usually near the middle of the span or over a beam.

This page prints no prices and does not recommend a brand or a company. It explains the part so you know what you are looking at under the floor.

What blocking does

A tall, thin joist wants to roll sideways under load. Blocking holds it upright. It also spreads a heavy point load, like a cabinet, across more than one joist. Both effects make the floor feel more solid. If your floor feels springy, see bouncy floors.

Blocking, bridging and solid blocking

You may hear several terms. Solid blocking is a full-depth piece of lumber. Cross bridging is a pair of angled pieces that form an X. Both do the same job, and which one you have depends on the era of the house and the local code. Neither is better in every case.

What to check under the house

Look for blocks that have come loose, fallen out or split. Check whether the wood is dark or soft near the foundation, which points to damp. A missing row can add to squeaks and movement, as covered in squeaky floors. Take dated photos of anything that looks wrong.

Moisture and blocking

Blocking sits close to the ground in a crawl space, so it catches damp air. Rot in the blocks is a sign the space is too wet, and the joists may be next. Fix the moisture source first, whether that is drainage, a leak or bare soil.

Adding or replacing blocks

Putting in a missing block is a small job in a sound floor, but do not cut, notch or remove anything in a floor with damaged joists. Structural work is for a licensed structural engineer to specify. Your local building department can tell you what applies where you live.

Frequently asked questions

What is blocking between joists?

Short lumber fitted between neighboring joists to keep them from twisting and to help share load across the floor frame.

What is the difference between blocking and bridging?

Blocking is a solid piece between joists. Bridging is a pair of crossed diagonal pieces. They serve the same purpose.

Does missing blocking cause squeaks?

It can contribute to movement and noise because joists can shift and rub. Other causes are common too, so check the whole floor.

Can blocking rot?

Yes. It sits low in a crawl space and picks up damp air. Rot in blocking is a sign of too much moisture, so look at the joists as well.

Do I need an engineer to add blocking?

A single missing block in a sound floor is minor, but any change to damaged or cut joists should be specified by a licensed structural engineer.

Sources

What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.

Keep reading