Home › Floor structure › Cracked floor joist: how to read the crack and who to call

Cracked floor joist

Not every crack in a joist is a failure. Where it sits and which way it runs decide how much it matters.

A cracked floor joist is not always an emergency. But you should not decide that yourself. A short crack along the grain is common in lumber that dried after it was installed. A crack across the grain, or one near a bearing point, is a different story.

This page prints no prices and does not recommend a brand or a company. It explains how to read what you see so you know who to call.

The crack that runs with the grain

Wood shrinks as it dries, and a joist can split lengthwise along the grain without losing much strength. These splits are often called checks. They tend to be narrow and to stay the same over time. Photograph one with a ruler beside it and a date on the photo. If it looks the same a month later, that is useful information for whoever inspects it.

The crack that goes across

A crack that cuts across the grain, or one that starts at the bottom edge and climbs, is where you should stop guessing. Joists carry load by bending, and the bottom edge is under tension. A crack there can mean the joist is failing. A sagging floor above it, or a gap opening between the crack faces, makes it more urgent.

Where the crack sits matters

Near the middle of the span, a crack can reduce stiffness. Near the end, where the joist rests on a beam or sill, it can reduce the ability to carry load at all. A notch or a drilled hole is often where a crack begins. Look for one. Plumbers and electricians sometimes cut joists to run a line, and the crack follows the cut.

Check for moisture as well

Dark staining, a soft feel when you press with a screwdriver or a musty smell point to a wet joist. Wet wood cracks and rots. Treat dark patches as growth and as evidence of persistent damp, and do not label them as a confirmed type of mold. Only a qualified third party can confirm that by sampling. Fix the source of the water first, whether that is a leak, a damp crawl space or poor drainage. See sill plate rot for the point where joists meet the foundation.

Who looks at it and what to do meanwhile

A cracked joist is structural, so a licensed structural engineer should look at anything across the grain, near a support or under a sagging floor. One who does not sell repairs gives you an opinion with no stake in the answer. Until then, keep heavy furniture and extra weight off that part of the floor.

Do not cut, drill or screw into the joist, and do not add a support on your own. Ask your local building department what permits apply to structural repairs where you live. For how repairs are usually done, see sistering floor joists.

Frequently asked questions

Is a cracked floor joist dangerous?

It depends on the crack. A short split along the grain is often harmless. A crack across the grain, near a support or under a sagging floor needs a licensed structural engineer.

What causes a floor joist to crack?

Drying and shrinking, moisture and rot, overloading, and notches or holes cut for pipes and wiring. Cuts are a common starting point.

Can I fix a cracked joist myself?

Joists are structural, so repairs should be specified by a licensed structural engineer. Do not cut into or drill the joist in the meantime.

How do I tell a normal split from a bad crack?

Look at direction, location and change. Along the grain and stable is common. Across the grain, near an end or growing is a reason to call an engineer.

Should I take photos of the crack?

Yes. Put a ruler next to it and date the photo, then repeat a few weeks later. It shows whether the crack is moving.

Sources

What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.

Keep reading