Home › Floor structure › Types of subfloor: what is under your finished floor and why it matters

Types of subfloor

The layer under your flooring is not the same in every house. Knowing which one you have tells you how it reacts to damp.

Most houses have one of four types of subfloor: plywood, oriented strand board (OSB), diagonal board planks or a concrete slab. Which one you have decides how the floor handles moisture from a basement or crawl space.

This page prints no prices and does not recommend a brand or a company. It helps you identify what you are looking at.

Plywood

Plywood is made of thin wood layers glued with the grain alternating. It is common in newer and renovated floors and tends to hold its shape. Repeated wetting can still make the layers separate. Look at the underside for dark stains and a flaky, peeling surface.

OSB

OSB is pressed from wood strands and glue. It is widely used in newer construction. Its edges swell when they stay wet, and the swelling does not fully go back. Check the seams between sheets for puffy edges.

Board planks

Older houses often have boards laid straight or on a diagonal across the joists. Gaps between boards are normal. Planks can shrink, cup and loosen over time, and they are a common source of noise. See squeaky floors.

Concrete slab

Some floors sit directly on concrete. A slab can wick moisture up from the ground, so the finished floor above it is the part that shows trouble first. That is a different case from a wood floor over a void.

How to tell which one you have

From a basement or crawl space, look up between the joists. Large sheets with visible seams are plywood or OSB. Narrow boards are planks. Plywood shows thin layers at an edge, while OSB shows flakes. If you cannot reach the underside, a heating register opening sometimes lets you see the edge.

Moisture is the common enemy

Whatever the material, a damp space below shortens its life. Check the soil, pipes and vapor barrier first. Subfloor water damage shows the signs, and subfloor repair explains how repairs are approached.

When to call a professional

If the floor is soft, sagging or springy over a large area, the framing may be involved. A licensed structural engineer can assess it. Your local building department can tell you which permits and materials apply in your area.

Frequently asked questions

What are the main types of subfloor?

Plywood, oriented strand board (OSB), diagonal or straight board planks, and concrete slab.

How can I tell if my subfloor is plywood or OSB?

Look at an exposed edge from below. Plywood shows thin layers, while OSB shows pressed wood flakes.

Which subfloor type handles moisture best?

None of them handle ongoing dampness well. Plywood usually holds up better than OSB, but all lose strength if they stay wet.

Why do older houses have plank subfloors?

Boards were the standard material before sheet products. They are still common in older homes.

Can a damp crawl space damage the subfloor?

Yes. Moisture rising from the soil can stain, soften and rot wood subfloor over time.

Sources

What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.

Keep reading